Products to the customer’s specifications
During our 50 years of business, we at Secap have worked side by side with our customers for the personalized development of thousands of electromechanical devices installed on trains, subways, buses, radio communication systems, aircraft, submarines, electro-medical devices, etc.
Ansaldo, Bombardier, Alstom, General Electric, Enel, Avio, Siemens and ECM are just a few of the names for which we have had the pleasure of designing and making customized products that have always guaranteed sturdiness, reliability, long life and excellent performance.
For more information
If you don’t find the product you are looking for here, send us an email to infosecap@secap.it, or ring us up at 02-9055758.
We’ll take a look together at the best solutions for your requirements.
Some of our products
GENERAL DECRIPTION:
5KW unregulated power supply , intended for applications in a rail traffic management environment. It can be connected in parallel to other modules to increase the delivered power or simply to obtain a redundant system. The system is hot-pluggable and hot-swappable.
DESIGN DETAILS:
It consists of a three-phase safety transformer followed by the rectification, protection and signaling circuitry.
The power supply has been designed to be interconnected to the power source and to the load by means of a wall bracket (ACSS0) and being equipped with wheels it can be easily moved, moreover it can be equipped with a sophisticated option consisting of the remote diagnostic board ACSDPRODUCT TYPE: AC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 400Vac three phase; 50Hz
NOMINAL INPUT CURRENT: 7.5A; 15A for 1minute
NOMINAL OUTPUT VOLTAGE: 51Vdc
NOMINAL OUTPUT CURRENT: 90Adc; 180Adc for 1 minute
NOMINAL POWER: 5 KW
GENERAL DECRIPTION:
150W multi-output DC / DC converter designed for use in on-board railway applications.
DESIGN DETAILS:
The converter supplies in output the voltage for the antenna to pick up the balise signal. The power outputs are on two separate galvanic areas and guarantee the redundancy of the two microcontrollers of the system (micro-A and micro-B). The reference standards adopted for the design are EN 50155 and S.T. FF.SS. No. 306158.
PRODUCT TYPE: AC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 24 Vdc
NOMINAL INPUT CURRENT: 8,5 Adc
NOMINAL OUTPUT VOLTAGE: Out1 16/24V ( selez. est.); Out2 5V; Out3 15V; Out4 5V; Out5 15V; Out6 5V; Out7 5V; Out8 24V
NOMINAL OUTPUT CURRENT: Out1 5A; Out2 2A; Out3 0,1A; Out4 2A; Out5 0,1A; Out6 0,4A; Out7 0,4A; Out8 0,1A
NOMINAL POWER: 150 W
GENERAL DECRIPTION:
DC maintenance system with VRLA batteries designed to be associated with ACS power supplies.
DESIGN DETAILS:
The system consists of a 48 Vdc 160A/h battery, a 1.2kW battery charger, a system of static switches for the fast connection and fdisconnection of the battery to the load and an advanced remote control and diagnostics system.
PRODUCT TYPE: AC-DC CONVERTER
NOMINAL INPUT VOLTAGE (battery charger): 380Vac three phase; 50Hz
NOMINAL INPUT CURRENT (battery charger): 2.4A
NOMINAL OUTPUT VOLTAGE (battery): 48Vdc
NOMINAL OUTPUT CURRENT (battery): 90Adc; 180Adc for 1 minute
NOMINAL POWER (battery charger): 1,2KW
GENERAL DECRIPTION:
DC / DC converter with double input: one at 500 / 600Vcc-max and one with 24V battery and 24V output, 640W-max.
The converter complies with MIL standards for EMI emissions.DESIGN DETAILS:
It consists of a monolithic mechanical case and a “PHASE-SHIFTFULL-BRIDGE” power stage, one powered by high voltage, and a “PUSH-PULL” stage powered by a 24V battery.
PRODUCT TYPE: DC-DC CONVERTER
NOMINAL INPUT VOLTAGE: PSU24: 400Vdc; 24Vdc – ESK24: 450Vdc
MAXIMUM INPUT CURRENT: PSU24: 8,1Adc; 72Adc – ESK24: 7,8Adc
NOMINAL OUTPUT VOLTAGE: 2x24Vdc
NOMINAL OUTPUT CURRENT: 20Adc/cad.
MAXIMUM POWER: 1280W
GENERAL DECRIPTION:
DC / DC converter with input at 500 / 600Vcc-max and output at 48V, 2.4Kw-max.
The converter complies with MIL standards for EMI emissions.DESIGN DETAILS:
It consists of a monolithic mechanical case and a “PHASE-SHIFTFULL-BRIDGE” power stage.
PRODUCT TYPE: AC-DC CONVERTER
NOMINAL INPUT VOLTAGE: PSU48: 400Vdc; ESK48: 450Vdc
MAXIMUM INPUT CURRENT: PSU48: 14,2Adc; ESK48: 13,6Adc
NOMINAL OUTPUT VOLTAGE: 48Vdc
NOMINAL OUTPUT CURRENT: 40Adc
MAXIMUM POWER: 2,4KW
GENERAL DECRIPTION:
DC / AC converter with 110Vdc input and 230Vac output, 50-60Hz sinus. internally selectable 1kW.
DESIGN DETAILS:
It consists of a sturdy 19 ” 84TE, 3HU rack mechanical structure and an inverter with a low frequency output transformer.
PRODUCT TYPE: DC-AC CONVERTER
NOMINAL INPUT VOLTAGE: 110Vdc
MAXIMUM INPUT CURRENT: 16,6Adc
NOMINAL OUTPUT VOLTAGE: 230Vac, 50-60Hz sinus. selezionabile internamente
NOMINAL OUTPUT CURRENT: 4,34Aac
NOMINAL POWER: 1KW
GENERAL DECRIPTION:
interconnection system for double peripheral place suitable for interconnecting static interfaces.
DESIGN DETAILS:
It consists of an aluminum mechanical structure divided into two sections of 104TE each.
It can contain 56 modules of 26TEe and 4 modules of 52TEinter-connected by means of special backpanel cards
GENERAL DECRIPTION:
250W non-regulated power supply, intended for applications in a railway signaling environment.
DESIGN DETAILS:
It consists of a single-phase safety transformer followed by the rectification, protection and signaling circuitry.
The use involves the union of two modules with the outputs in parallel, normal and reserve redundancy, housed in a specific 19 ” rack.PRODUCT TYPE: AC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 230Vac single phase; 50Hz
NOMINAL INPUT CURRENT: 2A
NOMINAL OUTPUT VOLTAGE: 52,75Vdc
NOMINAL OUTPUT CURRENT: 5Adc
NOMINAL POWER: 250W
GENERAL DECRIPTION:
600W regulated power supply unit , intended for applications in a railway signaling environment.
DESIGN DETAILS:
It consists of very modern power conversion circuits, PFC input stage with ZVT switch and “PHASE-SHIFT FULL-BRIDGE” output stage. This is to achieve high efficiency and low EMI emissions
PRODUCT TYPE: AC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 120-230Vac single phase; 50Hz
MAXIMUM INPUT CURRENT: 6,5 A
NOMINAL OUTPUT VOLTAGE: Vu: +48 Vdc ; Vu1 aux: +48 Vdc ; Vu2 aux: ±15 Vdc
NOMINAL OUTPUT CURRENT: Vu: 12 Adc; Vu1 aux: 0.5 Adc ; Vu2 aux: ±150 mAdc
NOMINAL POWER: 600W
GENERAL DECRIPTION:
conditioning module for railroad switching boxes.
It is a 2kW peak DC / DC converter for pulses of up to 10s every 30s.
It provides a 163Vdc output to maneuver the railroad switches.DESIGN DETAILS:
It consists of a 52 TE case with HV output interconnection
PRODUCT TYPE: DC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 48Vdc
NOMINAL INPUT CURRENT: 48Adc
NOMINAL OUTPUT VOLTAGE: 163Vdc
NOMINAL OUTPUT CURRENT: 12,25Adc
NOMINAL POWER: 2KW
GENERAL DECRIPTION:
conditioning module for track circuit, CdB, of station with multifunction capability.
It is a 80W-max DC / AC converter.
It provides a 140Vac output with the possibility of mixing 3 frequencies at the same time. Output frequencies: 50, 75, 83.3 and 178HzDESIGN DETAILS:
It consists of a 26TE case with HV output interconnection.
PRODUCT TYPE: DC-AC CONVERTER
NOMINAL INPUT VOLTAGE: 48Vdc
NOMINAL INPUT CURRENT: 1,9Adc
NOMINAL OUTPUT VOLTAGE: 140Vac
NOMINAL OUTPUT CURRENT: 0,45Aac
NOMINAL POWER : 60W
GENERAL DECRIPTION:
conditioning module for track circuit, CdB, line with multifunction capability.
It is a 200W-max DC / AC converter.
It provides a 145Vac output with the possibility of mixing 3 frequencies at the same time. Output frequencies: 50, 75, 83.3 and 178HzDESIGN DETAILS:
It consists of a 52TE case with HV output interconnection.
PRODUCT TYPE: DC-AC CONVERTER
NOMINAL INPUT VOLTAGE: 48Vdc
NOMINAL INPUT CURRENT: 4Adc
NOMINAL OUTPUT VOLTAGE: 145Vac
NOMINAL OUTPUT CURRENT: 0,93Aac
NOMINAL POWER: 135W
GENERAL DECRIPTION:
interconnection system for single peripheral place suitable for interconnecting static interfaces.
DESIGN DETAILS:
It consists of a 104TE aluminum mechanical structure.
It can contain 28 modules of 26TEe and 2 modules of 52TE interconnected with special backpanel boards.GENERAL DECRIPTION:
DC or AC converter in ultrasound AC for dental and surgical scalers
DESIGN DETAILS:
The converter is a special power supply for piezoelectric rings that are inserted in a titanium, steel and brass handpiece
and generate ultrasonic movement of steel tips that operate on human teeth and bones.
The construction is compact, reduced to a small self-dissipating module that can be housed in a dental unit or in a
portable device.
The module has been designed according to the safety standards EN60601-1, as well as to the American FDA.
Supply voltage 24VAC +-10% or 24-48Vcc
Maximum absorbed power 100W
Full microprocessor control, with error recorder and self-diagnosis
Control of ultrasonic power supply in security by software function
Search for resonance frequency with microprocessor
Generating multiple levels of power delivered
Safety protection for first fault
Serial communication for complete remotable management
Frequency range of the handpiece voltage between 24 and 30KHz
Output voltage up to 750Vrms
Output power up to 50W
GENERAL DECRIPTION:
DC / DC converter with input voltage from 16 to 60VDC, four outputs for a total power of 270W-max. The converter complies with MIL standards for EMI emissions.
DESIGN DETAILS:
It consists of a monolithic mechanical case and a “CURRENT-FEEDPUSH-PULL” power stage, with synchronous rectification circuits on the 5Vdc and 3.3Vdc outputs. The power circuit uses a planar transformer.
PRODUCT TYPE: DC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 48Vdc
MAXIMUM INPUT CURRENT: 21,8Adc
NOMINAL OUTPUT VOLTAGE: Out1 5Vdc; Out2 3,3Vdc; Out3 12Vdc; Out4 12Vdc
NOMINAL OUTPUT CURRENT: Out1 35Adc; Out2 10Adc; Out3 1,5Adc; Out4 1Adc
MAXIMUM POWER: 270W
GENERAL DECRIPTION:
conditioning module for electromagnets / transmission key.
It is a 60W DC / DC converterDESIGN DETAILS:
It consists of a 26TE case with HV output interconnection.
PRODUCT TYPE: DC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 48Vdc
MAXIMUM INPUT CURRENT: 5,2Adc
NOMINAL OUTPUT VOLTAGE: 50Vdc
NOMINAL OUTPUT CURRENT: 0,5Adc
NOMINAL POWER: 25W
GENERAL DECRIPTION:
conditioning module for railways high signals.
It is a 80W-max DC / AC converter.
It provides a 140Vac 50Hz output.DESIGN DETAILS:
It consists of a 26TE case with HV output interconnection
PRODUCT TYPE: DC-AC CONVERTER
NOMINAL INPUT VOLTAGE: 48Vdc
NOMINAL INPUT CURRENT: 1,9Adc
NOMINAL OUTPUT VOLTAGE: 140Vac
NOMINAL OUTPUT CURRENT: 0,45Aac
NOMINAL POWER: 60W
GENERAL DECRIPTION:
50W regulated power supply unit, designed to power the stamping turnstiles of the underground passenger gates.
DESIGN DETAILS:
It consists of two outputs 24Vdc / 2A and 5Vdc / 2Aregulated with high-performance switching technology
PRODUCT TYPE: AC-DC or DC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 102- 253 Vac 47-63HZ; 99-250Vdc senza selezioni
NOMINAL INPUT CURRENT: 1.8 A a 120 Vac – 1.1 A a 230 Vac
NOMINAL OUTPUT VOLTAGE: Out1 24Vdc; Out2 5Vdc
NOMINAL OUTPUT CURRENT: Out1 2Adc (6Adc x 3mS); Out2 2Adc
NOMINAL POWER : 58W
GENERAL DECRIPTION:
double battery charger with a 24Vdc output connected in series to a second 48Vdc for a total power of about 3.6kW. The supply voltage is that of a typical 600Vcc trolleybus system.
DESIGN DETAILS:
The charger consists of two independent “PHASE-SHIFTFULL-BRIDGE” power stages with outputs connected in series and input to a single filter.
PRODUCT TYPE: DC-DC CONVERTER
NOMINAL INPUT VOLTAGE: 750Vdc
MAXIMUM INPUT CURRENT: 19Adc
NOMINAL OUTPUT VOLTAGE: Out1 27,5Vdc; Out2 55Vdc
NOMINAL OUTPUT CURRENT: Out1 90Adc; Out2 45Adc
NOMINAL POWER: 5KW
GENERAL DECRIPTION:
interconnection system for reduced external peripheral place.
DESIGN DETAILS:
It consists of a monolithic aluminum mechanical structure suitable for containing modules of 33 TE and 17 TE.